Volkswagen Passat B7 Mirror Adjustment Knob - image

Files (1)

Passat_B7_mirror_knob.stl

STL

116.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 40%	100% solid	Recommendation
Passat_B7_mirror_knob.stl	Primary model	116.5 KB STL	Slice file	Slice file	Slice file	Print with high resolution for a snug fit

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Volkswagen Passat B7 Mirror Adjustment Knob

0 downloads52 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA for durability

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

low to no infill, 11 wall lines as suggested

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Replacement mirror adjustment knob for a 2014 Volkswagen Passat (B7?). This fits very snugly over the post. Print in high rez. I printed at 0.12 layer height, and 1.2 wall width. Select 11 wall lines to (mostly) eliminate infill (probably overkill). For extra credit, print with transparent filament to allow the red accent lighting to shine through, then paint black to taste. I've included the FreeCad FCStd file to allow for modification.