Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Light Covers

Volvo 240 bulb holder

0 downloads282 views0 quality score

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

paul f. (paulf77577)

Description

Made a copy of joritestlab's VW bulb holder by importing into FreeCad and rebuilding from basic shapes. I am still trying to perfect the 3 keying tabs so they fit better in the Volvo housing and make them printable without supports, but the current model will work. This works with the same bulb socket the joritestlab recommends. https://www.ebay.com/itm/Universal-1157-BAY15D-LED-Light-Lamp-Bulb-Socket-Holder-With-Wire-Connector/153966734883?hash=item23d921ee23:g:rRYAAOSwRn5dEvdo Some light sanding may be required to fit your specific housing. Printing: All my test prints have been in PLA with 100% infill with Repetier. I have been printing with the square base on the printer bed and no supports. There is an indexing pin on the Volvo housing, if a gasket is added, I recommend breaking off the pin and using a 38mm x 26mm x 3mm gasket.