Volvo/Polestar Key Cover (XC40, Polestar 2 and others)

0 downloads97 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA for durability and heat resistance

Saved part guidance

Strength start

20-30% infill for a balance between weight and strength

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC-ND

Link-only

Attribution required

Safety/IP review

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

A replacement cover for Volvo and Polestar keys. I know this fits Volvo XC40 and Polestar 2 keys and understand it may fit other cars that are post 2017. I've been teaching myself Fusion 360 and this was great learning exercise, inspired by a colleague being very disappointed with the key cover supplied with his Polestar 2! You need to print two covers for a complete key but the sides are interchangeable. I've included three designs which you can mix and match: * Blank * Shallow Polestar Logo (logo is 0.2mm recessed) * Deep Polestar Logo (logo is 0.4mm recesssed) On my printer with 0.1mm layers, the 0.2 recess logo sags enough that it feels pretty much flush with the first layer. Using a contrasting first layer pattern means you get a flat key with a very subtle logo. This is what's in two of the pictures, the third picture is the deep logo.