Files (2)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Volvo V40 phone mount for centre console
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Was looking for a phone mount to go near the centre console but couldnt find anything for the V40 so I made my own. This is made with a Samsung S10 in mind and it was made slightly wide incase I wanted a case on the phone, also wanted to have access to the bottom to be able to charge it if needed. To bolt it to the car it uses the existing Torx screw that is there, there are then 2 M5x20 bolts and locknut nuts on it, I could have done it with just 1 bolt and nut but I wanted to make sure its super secure Printing I have used Gyroid and 20% infill to make it a little thicker. I printed it on a.8mm nozzle for time and will do some post work to make it smooth on the sides that are visible however if you use a smaller nozzle your lines wont be as defines. SCALING. The phone mount may come out way oversize, just scale it to 10% in Cura and it will be the correct size:).
Compatible Vehicles
Originally published on thingiverse.com by Darren fellows (Bdrdaz) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
