VW Passat B6/B7 dog bone engine mount bush insert - image

Files (1)

jppvIIrjJHz.stl

STL

198.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	TPU 20%	TPU 100%	100% solid	Recommendation
jppvIIrjJHz.stl	Primary model	198.8 KB STL	Slice file	Slice file	Slice file	Use a 1.0mm nozzle for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

VW Passat B6/B7 dog bone engine mount bush insert

0 downloads75 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

TPU

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

100% infill for durability

Difficulty

Not rated — inspect geometry

Vehicle heat

Flexible material; verify heat and load

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY-SA

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Volkswagen Passat B6/B7 dog bone engine mount bush insert Based on an offering from SuperPro. Part No SPF3365 TPU 1.0mm nozzle 100% infill Also suits GOLF, AUDI, SEAT, SKODA.