Files (1)

Golf_Shifter_Sound_Isolator.stl

STL

26.6 MB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Saved filament data plus editable planning inputs for cost and time.

1 model file

Recommended kit

50g

Based on 40% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg TPU (75A-85A shore hardness)

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

VW Shifter Sound Isolator

1 downloads685 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

1 hosted model file

STL

Material start

TPU (75A-85A shore hardness)

Saved part guidance

Strength start

low to medium infill for flexibility

Saved part guidance

Orientation / supports

Likely not needed

Exact totals

50 g · 2 hours

Saved estimate

Vehicle exposure

Flexible material; verify heat and load

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

Michael Chen

Verified

Description

Needed a replacement sound isolator for my friend's 2011 Golf 2.5l Base 5MT, but wasn't willing to pay the $30 for the foam part or wait a month to get it from overseas. I printed this out of 95A TPU with manual supports, but it's kind of stiff. I would actually recommend printing with an 85A or even 75A shore hardness material. Replaces PN 5ND864220. Also fits Jettas and Tiguans.