VW T4 Android radio frame
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
Source link only
No hosted model files
Material start
ASA or PETG for temperature stability
Saved part guidance
Strength start
20-30% infill for durability and weight reduction
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is a adapter frame for an Android radio retrofitted into a Volkswagen VW T4. In US they call the car Vanagon. Most likely you have to break out the lower half of the DIN slot to get a double DIN slot, i.e. 7" by 4". Printed in black ASA because of temperature stability, 0.2mm layer height, 0,4mm nozzle and 0,5mm extrusion for better layer adhesion. Housing during print is required, 90° Bed, 250° extruder temperature, Scotch tape against warping It is a FreeCAD project, Version 0.19, I have included the FreeCAD file.
Compatible Cars
Originally published on thingiverse.com by F Last (Precisioneer) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
