Earn money selling original 3D car part models.
Start sellingEarn money selling original 3D car part models.
Start sellingEarn money selling original 3D car part models.
Start selling
Reference shelf
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Luka Muzz (TheMuzz)Hi! I needed a decent phone holder for my Volkswagen T4 (1997) so I designed / remixed one. Fits a Samsung S10 / S9 perfectly. It is very easy to print. The holder consists of five small parts. The actual holder for the phone can be printed out of TPU, so the phone with a case will fit in better. Part 4 is simply glued to part 3. You need just 3x M4x12mm screws (10mm-15mm will fit). The holes have no threads. Just screw in the M4 screw with some pressure to create a thread. Quantity Prints: 1x Part 1 - Dashboard Cover 2x Part 1.1 - Dashboard Cover Hooks 1x Part 2 - Connector with holes 1x Part 3 - Bracket base plate 1x Part 4 - Smartphone holder (TPU) I printed all parts (except Part 4) from PETG due to heat and UV exposure. ABS would be even better. Maybe PLA+ will do as well. PETG 0.2 Layer 25% Infill Support only for Part 4 I printed all Parts in 4~ Hours with my Flashforge Creator Pro.
Originally published on thingiverse.com by Luka Muzz (TheMuzz) · License: CC BY
Browse categories
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Other projects by us
Building tools that make life easier
Start a fitment, printing, or design discussion with this part already attached.
