Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Phone Mounts

VW Touareg tablet mount for dashboard cubby lid

0 downloads289 views0 quality score

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

Random Dood (randomdood)

Description

This is a bracket you can mount to the back of a tablet, such as an iPad Mini 4, that can hook onto the Touareg's dashboard cubby lid. This was designed for a Touareg T4 (2015-2017), but may also work on older models such as the T3. Please let me know if you confirm that it does work on other models. Attaching the bracket to the tablet could be done with Velcro as I did, or foam tape, etc. The best way to print this is by standing it up on the bottom face so that the holes are printed vertically, this way you will not need any supports. You'll probably want to use PETG over PLA if you'll be leaving it in a hot vehicle. Overture PETG works well for me. Let me know how it works for you. For me it turned out to be a pretty simple solution. Video: https://youtu.be/n1o45Tzy-xY