Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| trunklight1.stl | Printable file | 168.1 KB STL | Slice file | Slice file | Slice file | Ensure proper cooling for the PETG or ASA print |
| trunklight2.stl | Printable file | 248.0 KB STL | Slice file | Slice file | Slice file | Ensure proper cooling for the PETG or ASA print |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
VW trunk light
Print this part
Check the available model and saved setup details before opening your slicer.
Files
2 hosted model files
STL
Material
PETG or ASA for durability in outdoor conditions
Print time
Slice to calculate
Filament
Slice to calculate
Supports
verify in slicer
Infill
20-30% infill for a balance between weight and strength
Difficulty
Not rated — inspect geometry
Vehicle heat
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
I didn't like the hole in the tailgate for the emergency triangle we don't get included with the car here in Canada so I built an LED light to fit in there. Used an LED strip on each side and a sanded piece of PETG for the diffuser took apart an old battery holder for the metal parts. the switch hole isn't ideal as you need to lower the bracket to turn it on. I may revisit in the future.
Compatible Cars
Originally published on thingiverse.com by Joel Meier (Jol1234) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Trunk Grommet for VW Jetta/Golf MK3
VW Golf MK7 Rear Trunk Cargo Hook
VW Caddy 4 feste Kofferraum Abdeckung
Golf 4 Clip
Volkswagen Touareg II (7P) Trunk Panel Helper Hook
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
