Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Wireless Charging Slide Mount v1 for BMW i3
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ASA
Saved part guidance
Strength start
10-20% infill with 1.2-1.6mm walls
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Engine-bay exposure — use rated material or OEM
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is an adaptor that fits the Wireless Charging Stand below and similar types. I created this mount since I already several of these stands. This fits BMW i3 mount on the middle console. The charging stand slides in front. There is a hole at the back to enable the charging plug for the stand to go through. It is a 6-7 hour print on my Ender-3 when printed 0.1mm layer height, 10% infill and support on PLA. https://www.amazon.com/Seneo-Wireless-Charger-Compatible-Qi-Enabled/dp/B01H76NIAS/ref=sr_1_7?ie=UTF8&qid=1550974616&sr=8-7&keywords=turbo+iphone+wireless+charger
Compatible Cars
Originally published on thingiverse.com by Roman Francisco (MadeOnFilm) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
coin-, sunglasses-, card- and remote-mount for BMW vehicle
MagSafe Center Console Insert for BMW 3 Series
Wireless Charger Mount for BMW E90
Screw Cover / Cap for BMW vehicles
Double Din AC Relocation Bezel for BMW E46, cheap solution
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
