'01 ('97-'06?) Jeep Wrangler Nexus 7 Stand - image

Files (2)

2001Jeep_Nexus7_v7a.stl

STL

158.8 KB

2001Jeep_Nexus7_v8b.stl

STL

15.4 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

2 model files

Material plan

PETG

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Choose the needed variant, then slice it for grams, cost, and print time.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Phone Mounts

'01 ('97-'06?) Jeep Wrangler Nexus 7 Stand

0 downloads144 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

2 hosted model files

STL

Material start

PETG

Saved part guidance

Strength start

20-30% infill for durability, with 2-3 walls for strength

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

High cabin heat — validate PETG or choose ASA/ABS

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

With Android Auto v2 going self-contained, I found I really liked it, but my Turbo2 was just too small of a screen. Got hip to Head Unit Reloaded which acts an AA head unit emulator, which was just what I needed to put my old Nexus 7 (2012) to use. This one is for our '01 Wrangler that doesn't have the nut-access panels in the '10. Sits in the coin tray on the dash, with the legs in the vent grate. Since it sits in the center, I've got it angled at 15°. v8b has changes suggested by the spousal unit;) It's wider, has stops to prevent the tablet from sliding horizontally, and tabs on the "legs" to slide under the vent crosshatch. I recommend printing in PETG if you'll leave it in when not in use.