2010-2014 Ford F150 XLT Cupholder inserts - image

Files (1)

cup_holder_can.stl

STL

147.2 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Saved filament data plus editable planning inputs for cost and time.

1 model file

Recommended kit

50g

Based on 10% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg TPU / similar flexible filament

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

2010-2014 Ford F150 XLT Cupholder inserts

0 downloads432 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

1 hosted model file

STL

Material start

TPU or similar flexible filament

Saved part guidance

Strength start

0% infill for flexibility

Saved part guidance

Orientation / supports

Likely not needed

Exact totals

50 g · 2 hours

Saved estimate

Vehicle exposure

Flexible material; verify heat and load

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

Michael Chen

Verified

Description

Do you have a 2010-2014 Ford F150 XLT and hate the size of the cup holders like I do? Well, now you can use these 2 adapters to help keep cans and water bottles from rocking back and forth while driving around town. I have not printed these with a rigid filament yet. They were designed to be printed with a flexible filament like Sainsmart Flexible TPU or Ninja Flex) and 0 infill.