Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
2012 Honda Civic Cup Holder Expander
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ASA
Saved part guidance
Strength start
20% or higher
Saved part guidance
Orientation / supports
supports unlikely
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Cup holder expander for a 2012 style cup holder to widen the circumference of the cup holder. Doubles as a little bin! Fits both of the front center cup holder slots. Printing Instructions Print in your preferred material with as much infill as you like, but here are some print settings recommendations: 20% or higher infill should be plenty strong Supports not needed I would recommend a small brim to keep things adhered to the bed Cars get pretty hot. Select your material with this in mind, depending on where you live! Once configured: Print the model??? Expand cup holder ability.
Compatible Cars
Originally published on printables.com by JaredIsCoding · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
12-15 Civic Si Cup Holder Cover
Honda Civic Cup Holder Extension
99-00 Honda Civic Soda Can/Monster Cup Adapters
Red Bull cup holder adapter for 10th gen Civic
'97 Honda Civic DX Cup Holder (Shaved for 220mm bed)
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
