Files (2)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Choose the needed variant, then slice it for grams, cost, and print time.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Honda Civic EK3 Cup Holder Posavasos
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
2 hosted model files
STL
Material start
PETG
Saved part guidance
Strength start
20-30% infill for durability
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
ESP / ENG: He diseñado este posavasos inspirado en el original de Honda para que encaje en cualquier EK. El original es un trozo de plástico carísimo y no estaba dispuesto a pagar como si estuviera bañado en oro. Hay dos versiones, el primero es para dos latas típicas de 33cl o 50cl. La segunda versión lleva en medio un hueco para colocar una lata de 25cl (anulando las ubicadas a los lados si se hace uso de ese espacio en particular) Recomiendo imprimirlo en PETG para que aguante el calor (al menos si eres de zonas cálidas) para no llegar al coche después de estar aparcado a pleno sol y encontrarte un sin dios dentro de plástico ----------------------------------------------------------------------------------------------------------------------- I've designed this cup holder inspired by the original Honda to fit any EK. The original is a very expensive piece of plastic and I was not willing to pay as if it were bathed in gold. There are two versions, the first one is for two typical 33cl or 50cl cans. The second version has a hole in the middle to place a 25cl can (blocking the gaps on the sides if that particular space is used) I recommend printing it in PETG so that it can withstand the heat (at least if you are from warm areas) so as not to reach the car after being parked in full sun and finding a melt.
Compatible Cars
Originally published on thingiverse.com by Juanma Moreno Sanchez (JeFe_RoJo) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
