2015 Kia Sportage Speaker Mount Ring - image

Files (1)

6.75_SpeakerRng_2015_Sportage_v4.stl

STL

1.1 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
6.75_SpeakerRng_2015_Sportage_v4.stl	Primary model	1.1 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

2015 Kia Sportage Speaker Mount Ring

0 downloads188 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA for durability and temperature resistance

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for a balance between strength and weight

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Note that this model is in inches. This is a customized speaker mount adapter for a 2015 Kia Sportage. This is designed to fit 6.75 inch speakers. It was made using https://www.thingiverse.com/thing:2924217. I had to add mount tabs to the outside edges. Update 7/8/18: This speaker ring as designed didn't quite work. I have redesigned it, and the new design now works. I've made it 1 inch thick and adjusted the mount screw spacing and rotated the mount tabs to be between the speaker screws. Also moved the wiring slot to a hole in the ring. It is a little small for terminals. I used #10x1/14 mount screws and #8x1 screws for the speaker. The screw holes as printed worked well. I also used speaker gasket tape which I highly recommend: https://www.amazon.com/Parts-Express-Speaker-Gasketing-tape/dp/B0002ZPLPM/ref=sr_1_3?ie=UTF8&qid=1531112743&sr=8-3&keywords=speaker+gasket.