Files (10)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
2015+ Subaru WRX STI Switch panel
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
I wanted a nice OEM looking way to mount switches in a non permanent way. As far as I know, this will fit 2015+ STI models only. I don't know if it will fit the WRX as the interior is a bit different (please let me know if that is incorrect). There are several versions ranging from a basic plate to cover the area below the radio, to ready to install with switch cutouts. There are split 2 piece versions of each different model for people with smaller printers. For the split version with the switch cutouts, the left side has the tabs to fuse the halves together with glue (see bottom for adhesive I use). The solid plate split model does not have the tabs so I have also included just the tabs in a separate file. They are not required, but make life easier when joining the parts. As far as mounting. you'll have to get creative. I just lined it up and hot glued the inner edges, but you could make mounting brackets. Sand and/or fill to make smooth for paint or vinyl (I used 400 grit to finish, and auto-body filler to smooth gap from 2 piece print) LINKS: Switches- https://www.amazon.com/gp/product/B01F55SXVC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Adhesive- https://www.amazon.com/J-B-Weld-50133-Tan-1-Pack/dp/B009EU5ZNO/ref=sr_1_5?crid=37XNWIN55A71K&keywords=jb%2Bweld%2Bplastic%2Bbonder&qid=1572083173&sprefix=JB%2Bweld%2Bplas%2Caps%2C121&sr=8-5&th=1&psc=1 Vinyl wrap- https://www.amazon.com/gp/product/B01CF3ONIE/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&th=1
Compatible Vehicles
Originally published on thingiverse.com by Ryan Graf (TheRygr11) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
