2016 Mazda CX-5 Wireless Phone Charger + Android Auto - image

Files (3)

car_wireless_holder_v2-Cut.stl

STL

200.1 KB

tab_car_wireless_holder.stl

STL

54.7 KB

car_wireless_holder-Body.stl

STL

152.0 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Saved filament data plus editable planning inputs for cost and time.

3 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg ASA / ABS

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon
ABS filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ABS; use an enclosure and suitable ventilation, and verify temperature requirements and seller.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Phone Mounts

2016 Mazda CX-5 Wireless Phone Charger + Android Auto

0 downloads305 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

3 hosted model files

STL

Material start

ASA or ABS

Saved part guidance

Strength start

20-30% infill for durability, with 2-3 walls for stability

Saved part guidance

Orientation / supports

Likely not needed

Exact totals

50 g · 2 hours

Saved estimate

Vehicle exposure

Windshield/dash heat — validate after a parked-car soak

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

Michael Chen

Verified

Description

I didn't see any wireless charging solutions for the 2016 CX5, so I decided to make one. This was done with the Anker 313 Wireless Charger (https://a.co/d/3LgKjG2) and the Motorola MA1 (https://a.co/d/3tF0vrG) for Android Auto. Something to note: in my testing I was not able to charge wirelessly while running wireless android auto because my phone kept overheating so your mileage may vary. I suggest printing in ASA / ABS to avoid warping due to heat. ASA has worked well for me so far this summer.