2nd Gen Tacoma Low Profile Ditch Light Bracket

0 downloads53 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ABS

Saved part guidance

Strength start

30% infill with 2 walls for durability

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

UV/weather exposure — ASA is the starting point

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Low profile ditch light bracket for 2nd Gen (2005-2015) Toyota Tacoma. Mounts to hood hinges with factory hardware. I printed at 80% infill with tri-hexagon pattern on ender E3 and it has been strong enough. Mounting location gives about 1.5 inches horizontally to the windshield from the center of the bolt hole with the hood up. That said, choose your lights accordingly. Print from a durable plastic (ABS, PETG). I have one from PLA and it's holding up. So, it may be good enough in PLA. UPDATE: The PLA began to sag causing the lights to tilt sideways. I reprinted in ABS with a 0.8 nozzle, 2 walls, 30% infill, and it's holding up to the summer temperatures well. Use at your own risk to persons and property. Install instructions: 1) Remove the upper bolt that mounts the hood to the hinge. 2) Attach ditch light mount crooked and reinstall the bolt. Tighten snugly. 3) Remove the lower bolt and swing ditch light bracket into place. 4) Reinstall lower hood mounting bolt. 5) Torque down both bolts. 6) Install ditch lights 7) Repeat on opposite side.