3rd Brake Light Delete Covers for FRS/BRZ/86
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
Source link only
No hosted model files
Material start
ASA or ABS
Saved part guidance
Strength start
20-30% infill for durability, 1.2-1.6mm walls
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
UV/weather exposure — ASA is the starting point
Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
These are the 3rd/Cyclops Brake Light Delete Covers for the GT86 trio. Recommend to use ABS or ASA filament as PLA will warp due to the heat inside the car. I sanded and painted mine Flat/Matte Black to match the OEM interior color and also put a top coat. You will need 2 side pieces, doesn't matter which orientation as you can just flip over and use the bed side as your top. Highly recommend using 3M tape to mount it as they start flying around the car at 65+mph with the windows down.
Compatible Cars
Originally published on thingiverse.com by Nick Keim (Fusion3D) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
