Alhambra, Sharan, Galaxy Seat Handle (Rear or Middle Seat) VW SEAT FORD

0 downloads128 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA

Saved part guidance

Strength start

20-30% infill with 1.2-1.6mm walls

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Engine-bay exposure — use rated material or OEM

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-ND

Link-only

Attribution required

Safety/IP review

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This is a Handle for my W-Reg (2000) 1.9 TDi PD 115BHp Seat Alhambra. I believe it's the same for the Ford Galaxy. I believe its the same for the Volkswagen (VW) Sharan (and maybe Touran). I had just one of the five left on the car when I bought it. That was already broken. So I got out BR's trademark "Cheapest Available" (tm) Pink filament, and printed a few of these babies out. Check it. It comes in two flavours. "Right" and "Left and Centre" - that relates to the seat position, not the side the handle is on (though I'd be real surprised if there was a handle in the centre of the seat back!). They have been built, and tested for the Right handle side. Fits with a little push. As ever, I recommend a Acetone Treatment for these and as it's got overhang I'm printing at 0.35mm Layer height (just going to check that's going to plan!) Enjoy, all you VWAG Diesel MPV Drivers just trying to keep the old girl running! License: Non-commercial, no derivatives, open source attribution. I can't enforce any of that, it's all BS. I just don't want to see someone using my files to add "Barry" or "Leeroy" to the handle and then re-uploading it "Look what I did!" - Brilliant. If you want to use this as a basis of your design - DO SO. Just no TRIVIAL derivatives. Change angles, Change faces, just none of this "My name on My handle" rubbish! Peace, out! EUR ING Andy Southern, aka BathRobotics. p.s. if you like this car part, why not download (or just view) the other designs I've done: 20/06/2016: VW Sharan / Alhmabra Rear Adjustment Handle http://www.thingiverse.com/thing:1586975 15/01/2016: VW Sharan Trim Clip (3D Printed) http://www.thingiverse.com/thing:1274409 14/01/2016: VW Sharan Trim Clip (as Mass-produced) http://www.thingiverse.com/thing:1261167 25/10/2015: Alhambra Seat Handle http://www.thingiverse.com/thing:1092459 11/01/2015: Toyota Engine Seal Fix http://www.thingiverse.com/thing:629300 12/08/2014: Toyota Avensis Parcel Shelf Clip http://www.thingiverse.com/thing:426125 06/02/2015: Car Panel Clip (2 Versions, 4 parts!) http://www.thingiverse.com/thing:665635