Files (2)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Aménagement porte-gobelets Ford Ranger (Ford Ranger cup holders)
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is an arrangement for the front cup holders of the Ford Ranger (T7 and older) which makes better use of this space. I added felt pads below to make it softer, as well as a thin self-adhesive protection on the sides so as not to scratch the glasses or damage the objects. The printing is done in two parts: The general frame (Ford Ranger.stl cup holder) and the two cups (Ford Ranger.stl cup) which must then be glued. No support and low filling are OK. ------------------------------------------------------------------ Ceci est un aménagement pour les portes-gobelets avant du Ford Ranger (T7 et plus anciens) qui permet de mieux utiliser cet espace. J'ai rajouté des patins en feutrine dessous pour que ce soit plus doux, ainsi qu'une fine protection autocollante sur les parrois pour le pas rayer les lunettes ou abimer les objets. L'impression se fait en deux parties: Le cadre générale (Porte gobelets Ford Ranger.stl) et les deux gobelets (Gobelet Ford Ranger.stl) qu'il faut ensuite coller. Pas de support et faible remplissage sont OK.
Compatible Vehicles
Originally published on thingiverse.com by Martin Deltour (Naboo99) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
