Files (2)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Audi B5 S4 Front Speaker Bracket / Adapter
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
2 hosted model files
STL
Material start
PETG or ASA for durability and temperature resistance
Saved part guidance
Strength start
20-30% infill for a balance between strength and weight
Saved part guidance
Orientation / supports
Likely not needed
Exact totals
50 g · 2 hours
Saved estimate
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Michael ChenDescription
This bracket was designed for a friends Audi B5 S4 Bose door speakers, this is for the front left door mounted speaker (mirror the model for the right side). The adapter allows a replacement speaker with a standard mounting method to be fitted. I do not know if this would fit a normal A4 or one without the Bose Speakers. I also do not know if there were any regional differences. The stock speakers use a propriety mounting system which wont take any standard size speakers. The speakers this was designed for can be seen here: The dimensions of the speaker fitment can be seen in the images. The groove in the face which touches the door card is designed for the TPU insert to prevent rattles, this could probably also just be filled with silicone or resin.
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Audi q5, a4, a5 cover clip's pin for 4D0807300
Audi
Audi A3 8P Latch
Audi A3
Baofeng Ham Radio Holder
Audi, Chevrolet
Audi A4/S4/RS4 TPMS Module holder
Audi A4
Audi A3/S3 blank cap
Audi A3
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
