Files (1)

stoppel.stl

STL

70.6 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

1 model file

Material plan

PETG / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Slice the selected model with your final material, orientation, walls, and supports.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Interior

blend valve cover plug

0 downloads46 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

1 hosted model file

STL

Material start

PETG or ASA

Saved part guidance

Strength start

20-30% infill, 1.2-1.6mm walls

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

High cabin heat — validate PETG or choose ASA/ABS

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY-SA

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Blend valve cover plug English My car came to me with a dealer fitted air-conditioning, one of the modification which was done back then was an additional opening in the blend valve top cover for the small side vents in the dash board. Since his opening is no longer need with an ElectroCooler installed I designed this plug to shut this hole. Diameter is 35,5mm. You might what to check if this is the right size for you and scale it accordingly. I did use PETG in black as printing material with the standard setting: heat bed temp 70°, nozzle temp 230° ----------------------------------------------------------------------------------------------------------------------- Deutsch: Mein Auto war mit einer vom Händler installierten Klimaanlage ausgerüstet als ich es gekauft habe. Eine der Modifikationen war eine zusätzliche Öffnung in der oberen Abdeckung des Steuerkastens (Frischluft/Heizung) für den Anschluß der seitlichen, kleinen Lüftungsöffnungen im Armaturenbrett. Da diese Öffnung beim ElectroCooler nicht benötigt wir habe ich einen Stoppel entworfen. Der Durchmesser beträgt 35,5mm. Bitte vergewissere dich dass dieser Durchmesser der richtige für dich ist, andernfalls kannst du die Größe über die Skalierfunktion anpassen. Als Druckmaterial habe ich PETG in schwarz verwendet. Druckeinstellungen Standard: Bett 70°, Drucktemperatur 230°.