BMW 3 & 4 Series F32 F31 F32 F36 LCI cup holder insert - image

Files (1)

BMW F32 Cup Holder Phone Mount.stl

STL

683.6 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

1 model file

Material plan

PETG / TPU

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Slice the selected model with your final material, orientation, walls, and supports.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

BMW 3 & 4 Series F32 F31 F32 F36 LCI cup holder insert

0 downloads34 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

1 hosted model file

STL

Material start

PETG or TPU for flexibility and durability

Saved part guidance

Strength start

20-30% infill for a balance between strength and flexibility

Saved part guidance

Orientation / supports

supports unlikely

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

Public Domain

Commercial use allowed

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This is an insert to fit into the BMW 3 & 4 series F30 F31 F32 and F36 LCI center cup holder. This is the version with the sliding door, not the one you have to take out and put in the glove box. I set my phone into the cup holder, but it can rattle around so I made this insert. It has a cut out for my phone size, and camera lenses (Samsung Galaxy Fold 4), but should be adaptable to others. Hopefully the step or stl files can be imported and amended. It was made as a parametric model in OnShape. This is my first parametric design, so hopefully it's all ok. I printed it in NinjaFlex TPU, but it should be fine in any material. Standard print profiles, no supports needed.