boxster wind deflector SONY Action Cam mount

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/8ODF3k4NY71 I used this https://www.thingiverse.com/thing:360411, designed by maxspongebob, for a shroud for my Action Cam HD-AS200V, then made a two-part skeleton to hold it. I then took johann517's G-Clamp (https://www.thingiverse.com/thing:360411), and accompanying thumb screw, and shortened them to 30mm. I printed the shroud and frame parts, and two each of the g-clamp and thumb screw. I used ABS, 3 perimeters and 15% infill, you could go higher if you prefer. The frame parts are keyed, match up the holes and fasten with M3 screws, 12 mm I think. The shroud attaches with a 1/4"-20 screw and nut. Mmmm, maybe an inch long? The clamps attach to the GoPro style lugs with M5 screws, 20 mm, thumb screw to the front. Clamp to the clear plastic wind deflector between the seats. It's a bit tight if the top is up!