Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
C4 Corvette horn switch bracket
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ASA for durability and heat resistance
Saved part guidance
Strength start
50% density or higher for strength, with 5 or more walls
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
1994-96 C4 Corvette horn switch bracket/grommet. Made this to hold the horn switch contact in place. The stock piece that holds it breaks often and cannot be replaced without buying a whole steering wheel replacement which is expensive. So instead this grommet is made to be inserted in the hole through which the contact is inserted. It then holds it in place so that the switch can make contact. I printed this in 35 min with 5 walls and 50% density. I wanted this part to be very sturdy. Now my horn works and I can go get my inspection done.
Compatible Cars
Originally published on thingiverse.com by Hunter Townsend (Hunt4x4) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
C4 Corvette Lug Nut Cover
C4 Corvette Coolant Tank Insulator 14104598
C7 Corvette Gas Filler Door Lock Disable Plug
Chevrolet LS1 Oil Dipstick (head) - Corvette
2005 Chevy Colorado Gas Cap Tether
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
