Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| ChevyColoradoFrontPlateScrewMount_v1.stl | Mount / bracket | 1.4 MB STL | Slice file | Slice file | Slice file | Print at a low layer height for accurate thread detail |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Chevy Colorado Front License Plate Screw Mount
Print this part
Check the available model and saved setup details before opening your slicer.
Files
1 hosted model file
STL
Material
PETG or ASA for durability in outdoor conditions
Print time
Slice to calculate
Filament
Slice to calculate
Supports
verify in slicer
Infill
20-30% infill for strength, with 2-3 perimeter walls
Difficulty
Not rated — inspect geometry
Vehicle heat
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is a very simple functional model to replace missing license plate screw holders on my Chevy Colorado (2005). This may work on other Chevy vehicles. It has built in threads for an M5 screw. i recommend printing at a low layer height and no faster than 50 mm/s to maintain threads. I've included my Fusion 360 file in case you need to make any changes. More information can be found here: https://www.youtube.com/watch?v=DiVK3z2f7Bw&t=27s
Compatible Cars
Originally published on thingiverse.com by Kris Kersey (KerseyFabrications) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
2019+ Sierra / Silverado Round Frame Caps
Chevy Cobalt Rim Center Cap
Chevrolet
Chevy Cruze Visor Mirror Cover
Chevrolet
Chevrolet Suburban
Chevrolet
Chevrolet Cruze
Chevrolet
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
