Chevy Volt (2017) Phone Mount Xiaomi Mi5 - image

Files (1)

mi5.stl

STL

2.8 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

48g

Based on 25% main infill across listed model files

Material cost

$1.14

Filament only at roughly $24/kg PETG / ABS

Print time

1.4h–2.3h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 25%	100% solid	Recommendation
mi5.stl	Primary model	2.8 MB STL	44g $1.05	48g $1.14	104g $2.50	Ensure proper fit around the driver side accessories bay column, as the design is roughly hand-drawn

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Chevy Volt (2017) Phone Mount Xiaomi Mi5

1 downloads227 views0 likes

Shared by

Alfred

Verified

Description

**Work in progress, will upload pictures later. This is a phone mount for the 2017 Chevrolet volt plug in EV. It's printed in two parts and can be glued with any suitable phone holder; I've included one for my phone, the Xiaomi Mi5. It's mounted on the driver side accessories bay column. It's roughly hand drawn, so the fit is not perfect around the column. The fit for the phone, and USB-C cable, is perfect (use the included Xiaomi USB-C cable. A great accessory for using android auto, phone slides right in. M3 hardware may need to be pressed in, depending on printer tolerances. Highly recommend printing in ABS or PETG, something with a little flex and won't warp too easily on a hot summer day. Required: - 2x M3 hex nut - 2x M3x12 screw - Xiaomi USB-C cable - Xiaomi Mi5 - screwdriver Assembly is self explanatory, see pictures. Tighten down the screws to your liking. Slide USB-C cable in. Enjoy Android auto.