Chevy Volt (2nd Gen) Console RAM Mount Bracket - image

Files (1)

Volt_Ram_Mount_v2.stl

STL

472.1 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

1 model file

Material plan

PETG / ABS

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

40% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Slice the selected model with your final material, orientation, walls, and supports.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ABS filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ABS; use an enclosure and suitable ventilation, and verify temperature requirements and seller.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Center Console

Chevy Volt (2nd Gen) Console RAM Mount Bracket

0 downloads74 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

1 hosted model file

STL

Material start

PETG or ABS

Saved part guidance

Strength start

Higher infill percentage for added reinforcement

Saved part guidance

Orientation / supports

supports likely

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This is a center console 1" ball RAM style mount designed to fit in a 2nd. Gen Chevy Volt. I didn't like any of the commercially available mounting options out there and found this to fit my needs. I don't have any 3D modeling experience, In fact, this STL file is a combination of two separate STL files that I hacked together with PrusaSlicer. I welcome and encourage any improvements to this design. Please visit the original authors for their source files: -Volt center console bracket: https://www.thingiverse.com/thing:2804875 (CC BY 4.0) -1" ball RAM style mount borrowed from: https://www.thingiverse.com/thing:3196395 (BSD License) IMPORTANT: You need a screw & nut to firmly clamp the front of the bracket to the center console. There are cut-outs for a M3x12 screw & M3 hex nut, but really any screw and nut you had that would fit through the hole would work fine. Printing Recommendations: -I'd recommend printing in ABS or PET due to the potentially high-temperature requirements during the summer in your vehicle. -Consider a higher infill % in order to reinforce the ball and attachment point, especially if you plan on adding a significant amount of weight or other stress to the ball. Succesful printing with PETG, printed with a brim, and supports touching the build plate. (Supports are definitely needed under the ball).