Citroen/Peugeot armrest clip

0 downloads114 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA

Saved part guidance

Strength start

20-30% infill for strength and moderate flexibility

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC-SA

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Armrest plastic clip. (and FYI, first custom I upload on thingiverse, yepeeee). This is the clip used to lock armrest in a Citroen C5 or Peugeot 407 as well. If you have found this STL, this is most likely because you broke yours when leaning towards passenger seat and pushing too much / putting too much weight on your arm rest that got its clip broken because of that, isn't it?:) Other side needs to be flatten first with a file, then this clip can be glued with epoxy for instance. One of the best way to glue it is actually to insert the clip into the female slot, then add the glue and keep the arm rest pushing against it (just put some weight on the armrest). This clip could potentially be compatible for other vehicles from PSA group. Hope that helps.