Cup Holder Adapter for H2 Hydrology 22 oz Water Bottle in 2015 Hyundai Sonata - image

Files (1)

Water_Bottle_Adapter.stl

STL

1.5 MB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Saved filament data plus editable planning inputs for cost and time.

1 model file

Recommended kit

50g

Based on 40% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg NinjaFlex TPU

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Cup Holder Adapter for H2 Hydrology 22 oz Water Bottle in 2015 Hyundai Sonata

0 downloads191 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

1 hosted model file

STL

Material start

NinjaFlex TPU

Saved part guidance

Strength start

solid with all perimeters

Saved part guidance

Orientation / supports

Likely not needed

Exact totals

50 g · 2 hours

Saved estimate

Vehicle exposure

Flexible material; verify heat and load

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

Michael Chen

Verified

Description

This is a cup holder adapter for an H2 Hydrology 22 oz water bottle in a 2015 Hyundai Sonata. The water bottle fits loosely inside the cup holder and can fall out while driving. This design stabilizes the water bottle by filling the gap which keeps it from falling out. Water bottle: https://www.amazon.com/gp/product/B07T34HDTP This must be printed using a flexible filament like NinjaFlex TPU since the adapter has a snug fit against the water bottle (slight inference). The adapter may need to be raised or lowered on the water bottle to get the proper fit inside the cup holder: raise to loosen fit, lower for tighter fit. Step (.stp) and Fusion 360 (.f3d) files are included to make it easier to modify. Set slicer settings to print solid with all perimeters. Follow standard TPU printing settings.

Compatible Cars

Hyundai (all models)

Published Mar 8, 2026Updated Aug 9, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.