Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Cup Holder - Mazda CX-5
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ASA
Saved part guidance
Strength start
30% for the main body, 100% for the connector ends
Saved part guidance
Orientation / supports
verify in slicer, likely needed for the connector ends
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Anyone who owns a Mazda CX-5 will know that the location of the console cupholders is terrible. I designed this cupholder to fit in the very narrow slots of the vents and use the jut-out below the vent to support the weight of the beverage. These were printed in PLA, however PLA will sag over time. I have re-printed them in PETG for better resilience to the sun and extreme temps. These are designed in two pieces so that they can be printed without any supports on the main body. That said, supports should be added to the end of the arms that hook on to the vents. I used Cura to modify settings for just the connector portion to 100% infill and supports. Layer height:.3 or finer Infill: 30% Except arms where set to 100% (See pics) Recommended filament: PETG, PC, ASA, ABS, etc. Notes: NOTE: Supports are NOT required on main body... just the connector ends.
Compatible Cars
Originally published on printables.com by Barry Willick · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Cup Holder - Mazda CX-5
Frank Green Cup Holder Adapter Mazda CX-5
Yeti Cup Holder (for '21 Mazda CX-5)
Mazda MX5 ND Cup Holder Storage (passenger side)
Mazda 3 2003-2008 cup holder insert
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
