Files (1)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Yeti Cup Holder (for '21 Mazda CX-5)
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Don't use PLA, it will melt in the car. Ask me how I know. Added v6, switching the offset around to be more comfortable from the handle and allow the other cup holder to still be used. Also gives a little more space when finding the gap with the handle. I built these models as an adapter for the Maxda CX-5 cup holders. It allows you to slot in a 4 inch yeti mug that wouldn't otherwise fit. One model is completely vertical, which can interfere with side-by-side cup holders. The second offset model offsets the yeti holding walls so that the interference is removed. For fun, I threw in a voronai model... though I didn't attempt printing it. If you feel like trying it, it would be great to know how it prints! Should be printed 40% or higher - I've had a model printed @ 20% break apart just at the top of the base. Does not require supports. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Infill: 20% Filament: D3D PLA Black Category: Automotive.
Compatible Vehicles
Originally published on printables.com by 7repid · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
