Files (9)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Choose the needed variant, then slice it for grams, cost, and print time.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
DVD player holder with VESA 75 mount for TESLA Model 3
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
9 hosted model files
STL + STEP
Material start
PETG or ASA
Saved part guidance
Strength start
20-30% infill with 1.2-1.6mm walls
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
It is an holder for DVD player or tablet with the VESA 75x75 standard which mounts behind the seats of the TESLA Model 3. The central hole is for the photo standard screw and the four others are is for the VESA 75x75 mount. You can use this VESA holder for exemple: https://www.amazon.fr/dp/B074N4GDY6/ref=cm_sw_em_r_mt_dp_U_I-naEbWE4QBF3 The small inserts pass behind the rigid plastic plate and the large hooks are fixed on the headrest pins. It is necessary to glue a piece of felt 1mm thick to protect the plastic of the car. You must add the following: - Two 3x10mm thermoplastic screws - Two M4 nuts - Two M4x12 screws - Two M4 washers.
Compatible Cars
Originally published on thingiverse.com by Vincent ROBERT (vince_007) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
