Files (7)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ABS
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ABS 20% | PETG / ABS 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| 10c.stl | Printable file | 70.0 KB STL | 11g $0.27 | 12g $0.29 | 26g $0.63 | Print coin holders standing up for better results |
| 1c.stl | Printable file | 35.3 KB STL | 9g $0.22 | 10g $0.24 | 22g $0.53 | Print coin holders standing up for better results |
| 25c.stl | Printable file | 94.0 KB STL | 12g $0.29 | 13g $0.31 | 29g $0.69 | Print coin holders standing up for better results |
| 5c.stl | Printable file | 59.3 KB STL | 11g $0.25 | 12g $0.28 | 25g $0.61 | Print coin holders standing up for better results |
| rail.stl | Accessory piece | 11.6 KB STL | 8g $0.20 | 9g $0.22 | 20g $0.47 | Small functional file: print slowly; consider 80–100% infill for durability. |
| tray.stl | Printable file | 141.6 KB STL | 14g $0.33 | 15g $0.36 | 32g $0.78 | Print coin holders standing up for better results |
| tube.stl | Accessory piece | 11.4 KB STL | 8g $0.20 | 9g $0.22 | 20g $0.47 | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
F150 center console stuff
Need this part printed?
Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.
Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.
Description
F150 center console stuff I have a 2019 F150. The center console has a sliding tray that rides on some hangar rails, like in a file cabinet drawer. I designed these things to act as a sliding tray stop. These stops are 120mm's long and fit into the hangar rails. There are little slide mount tabs so I can attach different things to these rails. I have coin holders, a tube, and a tray. I can fit four coin holders into the 120 mm space. I printed one each of the coin holders but you have the freedom to print all 25's or all 1's, whatever you want. Go crazy! Let me know if you have any requests. I ran out of ideas. The tray is 120mm's long. The tube is just an enclosed 25c holder. I can keep a couple crystal light drink mixes in there, toothpicks, etc. Printed in ABS 25%.2 I tried printing the coin holders laying down but they print better for me standing up. Printed these all in black ABS, it blends in but it sure does not photograph very well.
Compatible Cars
Originally published on thingiverse.com by Stevie Ray (Old-Steve) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
