Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Fiat Grande Punto front headlight cover - Tappo per faro anteriore Fiat Grande Punto
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ASA for better heat resistance
Saved part guidance
Strength start
20-30% infill for a balance between weight and durability
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
UV/weather exposure — ASA is the starting point
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
I've lost the back cover of my front right headlight on a Fiat Grande Punto (model year 2008), so I've printed a new one. It can be mounted also on the left headlight. Printed in PLA+ and still working after some months, if it breaks I'll update the page. Ho perso il tappo posteriore del faro anteriore destro della mia Fiat Grande Punto (anno 2008), così ne ho stampato uno nuovo. Può essere montato anche sul faro anteriore sinistro. L'ho stampato in PLA+ e non si è ancora deformato (è montato da alcuni mesi), nel caso in cui si rompesse aggiornerò la pagina.
Compatible Cars
Originally published on thingiverse.com by gabriele lamperti (Gabbo27) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Fiat Rear Light Nut (M6)
Fiat 500 Abarth Euro Tail Light Panel
Fiat 500 LED Headlight cover
Fiat 500 headlight cover for LED conversion
Fiat 500 light cover
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
