Files (4)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Choose the needed variant, then slice it for grams, cost, and print time.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ABS filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ABS; use an enclosure and suitable ventilation, and verify temperature requirements and seller. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Fiat phone holder
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
4 hosted model files
STL
Material start
PETG or ABS
Saved part guidance
Strength start
20-30% infill for durability, with 2-3 walls for strength
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
High cabin heat — validate PETG or choose ASA/ABS
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Phone holder for Fiat Punto Evo, Alfa Giulietta, Fiat 500, Alfa Mito and maybe some others that use Fiat's standard TomTom navigation socket. In some cars (e.g. Giulietta) phone only fits horizontally. Requires 1.5mm rods (10mm long?) for hinges, ballpoint pen spring or piece of thin rubber hose for latch, partially threaded socket head M4x60mm screw with nut for reinforcement. The 17.5mm ball fits most available suction cup holders, if not, use smaller one or remix (that part is simple). Print in ABS or PETG or other temp resistant filament only! PLA will turn into a puddle of plastic in the summer. Sorry, no good photos, the car got sold:(.
Compatible Cars
Originally published on thingiverse.com by Sasha Naronin (sashan13) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
