1of2_Fiesta_trunk_lid.stl

STL

4.7 MB

2of2_Fiesta_trunk_lid.stl

STL

5.1 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

62g

Based on 25% main infill for the largest likely-needed model file

Material cost

$1.50

Filament only at roughly $24/kg PETG / ASA

Print time

1.8h–3.0h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
1of2_Fiesta_trunk_lid.stl	Printable file	4.7 MB STL	55g $1.32	60g $1.44	131g $3.15	Use sandpaper to smooth out any rough edges after printing
2of2_Fiesta_trunk_lid.stl	Printable file	5.1 MB STL	57g $1.38	62g $1.50	137g $3.28	Use sandpaper to smooth out any rough edges after printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Fiesta MK7 trunk lid clip

0 downloads3 views0 likes

Need this part printed?

Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.

Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.

Shared by

Verified

Replacement for trunk lid clip - Ford Fiesta Mk7. Might be bit tight. Use sandpaper:) Glue it together and squeeze with clamps.

Published Jul 9, 2026Updated Jul 9, 2026

Originally published on thingiverse.com by MScQ MScQ (MScQ) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.