Based on 90% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 90% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Focus Cargo Cover Support Mount
Need this part printed?
Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.
Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.
Description
Not sure if this is a common problem, but when I bought my 2017 Ford Focus ST3 it was missing one of these mounts on the hatch that allows the cargo cover to be lifted with the hatch. Instead of sourcing the part from Ford, I decided to measure the dimensions off of the one that I had and make a 3D model. The parts are not identical, but the one that I have designed has a way tighter fit so it will not come out accidently. The strap also clicks onto it nicely. I choose to print mine with 100% infill and supports everywhere (takes just about 30 minutes). It came out very sturdy and you cannot tell that it is printed unless you thoroughly observe it (granted your print settings are dialed).
Compatible Cars
Originally published on thingiverse.com by Casey Barnett (thecaseybarnett) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
