Files (4)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Fuse carrier adapter for Toyoty RAV4 Hybrid (from 2019)
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is a special "thing" to solve a very special problem, so it certainly is not for anyone. What was the problem? When (or if) you own a new Toyota RAV4 (2019 onwards) you may find the need for some electricity somewhere, in my case I needed a connection for a glove box light. Now there are wire tap connectors around that simply plug in to the fuse box, either in an empty slot or as a shared slot with an existing fuse. Unfortunately these connectors add to the height of the fuses so the original cover (which at the same time is the indicator for the fuse allocation) does no longer fit. In comes my thing - an adapter to go betwieen the fuse carrier and the cover, enabling to use a wire tap connector and cleaning up everything just nicely afterwards. The design is two-part in order to print without supports, glue it together with some superglue (strength is not an issue, there is no stress whatsoever on this part).
Compatible Vehicles
Originally published on thingiverse.com by Ulrich Lachmuth (UliLac) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
