Gen6 Camaro Coolant Bottle Cover

0 downloads112 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

ASA or ABS for heat resistance

Saved part guidance

Strength start

20-30% infill for durability, with 2-3 perimeter walls

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Engine-bay exposure — use rated material or OEM

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

The coolant bottle in the 6th generation Camaro SS (2019+) kind of sticks out because it's the only white/pink object under the hood. This is a first attempt at a black cover for it. The cover is too big to print in one piece on my FlashForge Adventurer 3, so I had to build it in two parts that are joined together using two Honda bumper retainer clips (91512-SX0-003). That also allows it to be assembled in two pieces on the coolant bottle. The engine bay is a hostile place, so I'm not sure a printed part is going to last long, even though I printed it with ABS, which supposedly has a "maximum service temperature" of 98C/208F. I'll leave it installed for a few weeks and see how it does.