Files (7)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Grill Badge Emblem for Volkswagen MKIV Golf
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
7 hosted model files
STL
Material start
PETG or ASA
Saved part guidance
Strength start
20-30% infill with 1.2-1.6 mm walls
Saved part guidance
Orientation / supports
Likely not needed
Exact totals
50 g · 2 hours
Saved estimate
Vehicle exposure
UV/weather exposure — ASA is the starting point
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Michael ChenDescription
I was having trouble finding this grill emblem for my GTI, so I recreated it myself. Print the badge mount and stick a replacement hatch emblem to it. Knockoff emblems can be found on Amazon, eBay, or Aliexpress for around $10. You can also pull a hatch emblem from the parts yard. This model conveniently uses the same OEM mounting points. It's also beefier, more secure, and optimized for 3D printing. Attach the optional slide lock and slide to towards the front after installation to prevent unwanted removal. Depress the center to release the lock. If you can't procure a replacement hatch emblem for a reasonable price, you can print one of the included models, then sand and paint to your liking. The flat inset version can be printed with a layer change for a two tone effect. Vinyl decals also work well to fill the inset versions (You can find pre-cut vinyl at Badgeskins). Volkswagen part numbers for reference:.
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Window Crank Handle for Volkswagen
Volkswagen
VW Door Card Repair Parts (Scirocco, Golf, Polo and more)
Volkswagen
Volkswagen MK5 Jetta Headlight Dust Cover
Volkswagen Jetta
VW Tiguan Trunk floor Clip/ Kofferraumboden Clip
Volkswagen
vw beetle type 1 basket
Volkswagen Beetle
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
