Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Hubcentric Ring 72.6-64.1 for "Fast Wheels" on a Tesla Model 3.
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ASA for durability, but PLA is acceptable since it's non-weight bearing
Saved part guidance
Strength start
High infill percentage, such as 80-100%, for strength and minimal deformation
Saved part guidance
Orientation / supports
supports unlikely
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Low-heat or decorative use only
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Juts a hubcentric ring to mount/center Fast Wheels FC04 rims on a Tesla Model 3. Will work for any wheels with a bore of 72.6 needing to be mounted on a model 3. Can print in PLA since these really don't bear any weight.. they are just to help center the wheel. Normally I would just order a set for 10 bucks but I forgot.. so ordering and waiting a week or just printing my own and being done in an few hours.. I printed them 100% infill with 6 walls so that it was just a bunch of walls instead of there being silly infill.. doing 20% barely reduced the print time! Make the inner walls print faster. can bang these out quick.. I printed in 0.2mm height and 0.4mm width using a 0.4mm nozzle.
Compatible Cars
Originally published on thingiverse.com by Joe Voisin (j-voisin) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Tesla Model 3 Flitsmeister Two bracket
Tesla Charger fence mount
Tesla Model 3 Wiper Arm Nut Cover
Tesla J1772 Security Lock
Replacement for Tesla Model 3 hitch plug
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
