Hyundai Sonata Tweeter Replacement Blank - image

Files (2)

Sonata_-_Tweeter_Plate_Drivers.stl

STL

154.2 KB

Sonata_-_Tweeter_Plate_Passengers.stl

STL

154.2 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Saved filament data plus editable planning inputs for cost and time.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Accessories

Hyundai Sonata Tweeter Replacement Blank

0 downloads203 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

2 hosted model files

STL

Material start

PETG or ASA for durability and heat resistance

Saved part guidance

Strength start

20-30% infill for sufficient strength without excess material

Saved part guidance

Orientation / supports

Likely not needed

Exact totals

50 g · 2 hours

Saved estimate

Vehicle exposure

High cabin heat — validate PETG or choose ASA/ABS

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

Michael Chen

Verified

Description

The base model Hyundai Sonata has a sound system that leaves a bit to be desired. Most annoyingly, the vehicle has no tweeters but instead points a "full range" driver at the windshield. This plate allows for replacement of the driver with a component tweeter of your choosing. Print the parts and drill a hole appropriate for the flush-mount hardware that came with your tweeter set. If you prefer to print the part with the hole already in it, feel free to use my original OnShape model and re-size the hole. (Change the #Opening_Diameter variable to the diameter of the opening of your flush-mount adapter then export each of the two parts.) These brackets don't have to support a lot of weight so PLA is fine. If you are concerned about strength or heat resistance, use a Nylon or ABS filament instead. A panel tool and protective cloth.