iPhone 11 Pro Max holder/mount for Lexus IS 300 (XE30, 2013+)
Files (2)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Obsolete Nerd (ObsoleteNerd)Designers selling from the US, Canada, the UK, the EU/EEA (except Iceland), Switzerland and Gibraltar can also list separate original designs for sale and receive 80% of the listing price, paid out by Stripe in your local currency (conversion fees may apply). Claiming credits you here; it doesn't put this imported part up for sale.
Description
I don't like how chunky most phone holders are (due to wanting to fit any/all phones), or how they mount to your air vent or windscreen, 2 things I kinda need unobstructed. I wanted it out of the way, but still reachable, and figured the area at the front of the centre console would be perfect... so I designed this little holder specifically for my iPhone 11 Pro Max (in a simple case). Once the phone is in the holder, you barely even notice it and it looks like the phone is just "floating" there, perfectly within reach yet completely out of the way at the same time. Rotate the L bracket to sit upright and the phone holder to lay flat on its back, turn "Supports Everywhere" on, and print at 100% infill (not required, but I'd like it to last). Can use any colours you want to create the contrast for the logo, I just used black/silver to suit the interior of my car. With my Prusa on stock settings using the PrusaSlicer and the default 0.15mm profile, the fit ended up being absolutely perfect. I applied some CA glue and then used standard wood working clamps to press it tightly together until the glue dried, but I found it fit so snugly that the glue is actually optional. I swear I planned it that perfectly... I used some 3M adhesive tape to mount it to the car.
Originally published on thingiverse.com by Obsolete Nerd (ObsoleteNerd) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Comments (0)
Part lists
Ask the community about this part
Start a fitment, printing, or design discussion with this part already attached.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
