Jeep WJ Grand Cherokee Front Bumper Retainer Clip 6505361AA

0 downloads121 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA for durability and resistance to road/petrol solvents

Saved part guidance

Strength start

20-30% infill for a balance between strength and flexibility

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

UV/weather exposure — ASA is the starting point

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC-SA

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This is a front bumper retainer for my 2000 WJ Jeep Grand Cherokee Limited. I'm assuming it is the same for all 1999 - 2004 WJ Jeep Grand Cherokees, and you can't really mistake this for any other body fastener I have seen. It is fully functional when printed in any tuff filament with resistance to road/petrol solvents like gasoline, diesel, tar, oil, etc. The insert is intended to be printed at the angle I modeled it with for layer strength. There is no better way to say this next part without making it obvious I tried to avoid it, so keep your mind out of the gutter It will fit tight at first, so pop the tab in and out a few times to loosen the slot before installing the retainer in it's hole.