Key Cover for BMW vehicles
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
Source link only
No hosted model files
Material start
PETG or ASA for durability
Saved part guidance
Strength start
20-30% infill for a balance between strength and weight
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Cover/Case for BMW key fob. The buttons on these keys are very easily pushed in a pocket and the range is pretty respectable, potentially leaving your car unlocked until your return... This print was designed to help stop this happening. The case clicks into the grooves in the side of the key (can be stiff to begin with, loosens over time) There is a hole that runs down one side for a length of wire/string so that when the key is in use, the cover doesn't get lost! Printed vertically (as shown in slicing software photo) with minimal supports: 10% @ 1.5mm spacing.
Compatible Cars
Originally published on thingiverse.com by Jake Monaghan-Gray (OneDotSixDesign) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
