Earn money selling original 3D car part models.
Start sellingEarn money selling original 3D car part models.
Start sellingEarn money selling original 3D car part models.
Start selling
Reference shelf
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Arthur Miller (HE3DUser151)I ordered 60mm Gauges and couldn't find a suitable pod. I have revised the STL for 52mm gauges as well. The Gauges have been rotated 15 degrees towards the driver. I redesigned the Tabs/Legs/Feet to better fit the dash. At least for my 2007 they now fit perfect. These are designed to slip over the existing posts. There is 1.75mm of smaller diameter to hold it to the post which is the same thickness as the factory cubby tabs. The tops are slotted exactly how the factory vents are constructed to fit perfectly in the original location. The lower tab has been shortened to better fit the location of the tab on the back of the clock. I also thickened the tab that inserts into the back of the body for a tighter fit. This may be year specific so please confirm with your own dash. You can use the factory screws to hold it all back in place. A huge thanks goes out to the original designer which saved me a lot of time in design. I used 3x10 countersunk screws to hold the tabs to the body.
Originally published on thingiverse.com by Arthur Miller (HE3DUser151) · License: CC BY
Browse categories
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Other projects by us
Building tools that make life easier
Start a fitment, printing, or design discussion with this part already attached.
