Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Mazda Miata NA6 Throttle Position Sensor Adapter for NB2 (2001-2005) Intake Manifold Fitment with BMW TPS Sensor
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ASA for durability in engine compartment conditions
Saved part guidance
Strength start
20-30% infill for strength and moderate weight
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Engine-bay exposure — use rated material or OEM
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
What is this? This is an adapter for fitting a BMW Throttle Position Sensor on an NA6 1990-1993 Mazda Miata (manual transmission). Most adapters (including the one from FlyinMiata) are designed to cover the column of the shaft that the sensor connects to. Unfortunately, that adds height over the stock sensor. This is adapter for lowering the profile so that the BMW sensor can fit in non-stock applications (like using an NA6 manual throttle body on a 2001-2005 manifold) without the sensor contacting the valve cover. Note: this adapter requires modifying (cutting) the protruding shaft for the sensor. Ideally this is done with a cutting wheel. Note 2: I have only tested this in combination with the FlyinMiata throttle body adapter. https://www.flyinmiata.com/fm-throttle-body-adaptor.html Note 3: This is heavily based on the FlyinMiata TPS adapter for NA6 https://www.flyinmiata.com/default/tps-upgrade.html Note 4:If you need the sensor, it's BMW part number 13631726591.
Originally published on thingiverse.com by Nicholas Allain (nickallain) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
